aut.vn Bộ đếm Omron K3HB-CNB-FLK1AT11 AC/DC24

Power supply voltage : 24 VDC
24 VAC 50/60 Hz
Input type : Pulse (NPN/voltage pulse input)
Digits : 5 digit (-19999 to 99999)
Number of event input : 5 point
Power supply voltage : 24 VDC
24 VAC 50/60 Hz
Allowable power supply voltage range : 85 to 110% of the power supply voltage
Power consumption : 7 W max. (At maximum load)/11 VA max. (At maximum load)
External power supply : 12 VDC ±10% 80 mA
Input type : Pulse (NPN/voltage pulse input)
Output type : Judgment output: Transistor
Comparative output: OUT1, OUT2, OUT3, OUT4, OUT5
Transfer output: Communications (RS-232C)
Pulse measurement input : Function : F1: Individual inputs
F2: Phase differential inputs
F3: Pulse counting input
Contact input (dry contact input) : 30 Hz max. ON/OFF pulse width of 15 ms min.
No contact voltage pulse : F1: 0 to 30 kHz ON/OFF pulse width of 16 µs min.
F2: 0 to 25 kHz ON/OFF pulse width of 20 µs min.
F3: 0 to 50 kHz ON/OFF pulse width of 9 µs min.
Voltage level : ON voltage: 4.5 to 30 V, OFF voltage: -30 to 2 V, input impedance: 10 kΩ
Open collector : F1: 0 to 30 kHz ON/OFF pulse width of 16 µs min.
F2: 0 to 25 kHz ON/OFF pulse width of 20 µs min.
F3: 0 to 50 kHz ON/OFF pulse width of 9 µs min.
Measurement range : F1: ±2 gigacounts
F2: ±2 gigacounts
F3: 0 to 4 gigacounts
Event input : Number of input : 5 point
Input method : NO-Voltage contact/NPN open collector
Event name : Hold input
Reset input
Compensation input
Connection method : Terminal blocks
Contact : ON: 1 kΩ max.
OFF: 100 kΩ min.
No-contact : ON residual voltage: 2 V max.
OFF leakage current: 4 mA max.
Maximum applied voltage: 30 V max.DC
Leakage current: 0.1 mA max.
Judgment output : Transistor output : NPN open collector
Maximum load voltage: 24 V max.DC
Maximum load current: 50 mA max.
Leakage current: 100 µA max.
Display : Display method : Negative LCD (backlit LED) 7-segment digital display
Digits : 5 digit (-19999 to 99999)
Character height : PV: 14.2 mm (green/red)
SV: 4.9 mm (green)
Comparative output response time : 1 ms max. (time until the comparative output is made when there is a forced sudden change in the input signal from 15% to 95% or 95% to 15%.)
Insulation resistance : 20 MΩ min. (at 500 VDC)
Dielectric strength : Between the entire external terminal and case: 2,300 VAC 1 min
Noise immunity : ±1,500 V at power supply terminals in normal or common mode (waveform with 1-ns rising edge and pulse width of 1 µs/100 ns)
Vibration resistance : Malfunction: 10 to 55 Hz, Acceleration: 50 m/s2, 5 min 10 sweeps each in X, Y, and Z directions
Shock resistance : Malfunction: 150 m/s2, 3 times each in 3 axes 6 directions
Degree of protection : Front: NEMA4X for indoor use (equivalent to IP66)
Case rear: IP20
Terminals: IP00 + finger protection (VDE0106/100)
Memory protection : EE-PROM (non-volatile memory) Number of rewrites: 100,000
Ambient temperature : Operating: -10 to 55 ℃ (with no freezing or condensation)
Storage: -25 to 65 ℃ (with no freezing or condensation)
Ambient humidity : Operating: 25 to 85 %
Accessories : Waterproof packing, Fixtures, Terminal Cover, Unit label, Instruction manual
Weight : Approx. 300 g
Communication method : RS-232C Half duplex
Synchronization method : Start-stop synchronization (asynchronous method)
Baud rate : 9600/19200/38400 bps
Transmission code : ASCII
Data length : 7 bits or 8 bits
Stop bit length : 2 bits or 1 bit
Error detection : Vertical parity and FCS
Parity check : Odd, Even


Chúng tôi có hơn 35.000 sản phẩm vì vậy hãy liên hệ với chúng tôi
Để được tư vấn và check tình trạng hàng bạn nhé!

AUTO TECH VN cam kết:
1. Hàng Chính Hãng Autonics Việt Nam.
2. Xuất được Hóa đơn VAT.
3. Cấp CO/CQ công chứng bởi Autonics Vina.
4. Giá cạnh tranh.
5. Sản phẩm bảo hành theo chính sách của hãng.

AUTO TECH VN - AUT.VN

Thông tin liên hệ

ĐT/ Zalo : 0968.053.025
Email: support@aut.vn Email2: sale@aut.vn
Địa chỉ: 07 KĐT Flora Mizuki, Đường Số 1, Bình Hưng, Bình Chánh, Hồ Chí Minh